Documentation How to embed video

EDIT ADDITIONAL INFORMATION IN PRODUCTS

Documentation How to embed video

Seachem - PolyGuard 10g

For unique tab:

+ Add unique tab for product page

Seachem - Safe

For unique tab:

+ Add unique tab for product page

When dosing Stability™, how long should I turn off my UV filter or my ozone? A: The UV and/or ozone should be kept off for the 7 days you are dosing if you are cycling or for at least 24 hours if it is for Stability™ additions of new fish or water changes. The reason both should be turned off is because UV and ozone break down and kill bacteria.
 
If AmGuard™ is removing ammonia from the system, won't that starve the beneficial bacteria? A: The bacteria should be able to find a suitable home within 24 hours.
 
I just finished cycling my new tank, but i made a mistake of introducing many fishes at the same time. i was wondering if i could use Stability™ to increase the bb's for the increased bioload? A: Yes, Stability™ will prove very helpful in removing ammonia and nitrite, including nitrate, as a result of the increased bioload. If your ammonia level is not at zero, a combination of Stability™ and AmGuard is very useful and great in reducing ammonia toxicity on the bacteria blend as the bacteria consumes the ammonia, nitrite and nitrate in the aquarium
 
Is it possible to overdose AmGuard™? A: AmGuard is very safe and quite difficult to overdose to the point of harming tank inhabitants, but a large enough dose can start to deplete the system of oxygen. The standard dose of 5 mL per 50 gallons of water is recommended for general ammonia control, and higher doses can be calculated to deal with elevated ammonia levels (always dose according to a known level of ammonia in the system). There are a few situations where caution should be taken with elevated doses though:
 
Your tank is already low in oxygen
 
A tank with an exceptionally high bio-load, high temperature, or poor circulation is likely quite low in oxygen, so reducing the oxygen any further may be dangerous to tank inhabitants. In this case, using a half dose of Prime or increasing the oxygen content of the tank is recommended.
 
You are using another product that also reduces oxygen
 
Most conditioners that clear away chlorine and chloramine, products that detoxify ammonia and nitrite, as well as some medications will reduce oxygen levels in the tank.
 
Will AmGuard affect my pH, KH, or GH? A: No, AmGuard™ will have no impact on the pH, KH, or GH of the typical aquarium.

For unique tab:

+ Add unique tab for product page

Seachem - StressGuard

For unique tab:

Is StressGuard™ plant/reef/invert safe? A: Yes, as long as StressGuard™ is dosed according to the instructions, it is safe to use in a reef or planted aquarium containing invertebrates.
 
Can StressGuard™ be used in conjunction with other medications? StressGuard™ is compatible with all medications, EXCEPT those that are copper based, including Seachem Cupramine™.
 
How often can StressGuard™ be dosed to an aquarium? A: When used as directed, StressGuard™ can be dosed safely every 24 hours (the active ingredient dissipates in a 24 hour period).
 
Is it true that StressGuard™ works by being an irritant to the fish, the irritation being the cause of increased slime coat production? A: No. StressGuard™ does not contain anything to "irritate" fish into producing more slime. What makes StressGuard™ very successful at healing is the fact that it contains protein active colloids. This protein active colloidal agent actively seeks out any wounds, abrasions, or places where exposed proteins are and attaches to this area to help directly deliver the disinfectant in the product and start the healing process. This protein active colloid, because it binds to the exposed proteins, also acts like a liquid bandage to the abrasion.
 
Do I need to remove carbon or other chemical filtration media when using StressGuard™? No, chemical filtration does not have a significant impact on StressGuard™.
 
Should I turn off my protein skimmer when dosing with StressGuard™? Yes, it is best to turn off your protein skimmer when dosing with StressGuard™.

For unique tab:

StressGuard™ is the premium slime coat protection product. StressGuard™ will reduce stress and ammonia toxicity whenever handling or transporting ﬁsh. StressGuard™ binds to exposed protein in wounds to promote healing of injured ﬁsh and to reduce the likelihood of primary and secondary infections. StressGuard™ is compatible with all medications except those that are copper based. StressGuard™ is not amine based and will not interfere with Purigen®; or HyperSorb™ regeneration. StressGuard™ does not coat resins or clog filtration like competing “slime coat” type products can.
 
 
What makes StressGuard™ very successful at healing is the fact that it contains protein active colloids. This protein active colloidal agent actively seeks out any wounds, abrasions, or places where exposed proteins are and attaches to this area to help directly deliver the disinfectant in the product and start the healing process. This protein active colloid, because it binds to the exposed proteins, also acts like a liquid bandage to the abrasion. Some products are marketed to be squirted in the bag when a fish is purchased. Those products are generally acidic, with some brands being a very strong acid. Putting such a product in a small, enclosed container with a fish often does more harm than any intended good. StressGuard™ has a pH of 7.0. It will not affect the pH of an aquarium, even at large doses. There are no other products on the market that can compare to the effectiveness of StressGuard™.
 
 
Sizes: 50 mL, 100 mL, 250 mL, 500 mL, 4 L

For unique tab:

+ Add unique tab for product page

Seachem - SulfaPlex 10g

For unique tab:

Dosing in Water Remove all invertebrates - these are extremely sensitive to medication. Turn off UV filters, ozone filters, and remove chemical filtration like MatrixCarbon™ and Purigen®. Use 2-3 measures (included) per every every 40 L (10 US gallons). Repeat this dose every 72 hours for a maximum of 3 weeks.
Dosing in Food SulfaPlex™ is most effective when used in the water, but it can also be added to the food. Feed the medicated food mix (recipe below) every day until the infection clears or up to 3 weeks.
 
 
1 scoop SulfaPlex™
 
1 scoop Focus™
 
1 tbsp food (preferably pellets or frozen food)
 
 
A few drops of water if using a dry food
To enhance palatability use with GarlicGuard™ or Entice™.
After Treating When the treatment period is over, SulfaPlex™ can easily be removed using activated filter carbon like MatrixCarbon™. It does not linger in the substrate or filter media of the tank.

For unique tab: